italiano english deutsch français español 英汉词典

Home > Machines > Dalcos ELXN > ELXN 1000

COIL-FED PUNCH-LASER COMBO SYSTEM DALCOS ELXN 1000

MAXIMUM OUTPUT AND FLEXIBILITY ON THE MARKET

DALCOS ELXN 1000 combo is the world’s first coil processing system to combine EXN servo electric coil punching machine and LXN coil- and sheet-fed fiber optic laser cutting system. It processes strips from 200 up to 1000mm in width with gauge from 0.5 up to 3mm.

The two machines are separate so that they can work SIMULTANEOUSLY on different portions of the strip and halving the processing time.

This system combines the speed of the punching machine with the flexibility of the laser cutter, as well as offering the well-known advantages of coil processing, such as optimization of the raw material.

The operating principle is very simple: the numerically controlled feeder moves the coil in the direction of the X axis, while the punch heads (using standard thick turret tools) move on a carriage in direction Y; the actuator is a servo press which develops a force of 20 tons and moves along the X and Y axes above the punches.

The punching machine is fully electric and the tool turret configuration evolves in line with the customer’s requirements: new tool post arches can be purchased for installation in the punch carriage to change the turret configuration and adapt the machine to new and other production requirements

Thanks to over 25-year experience in coil punching, this Dalcos system is supplied with its specific decoiler and straightener.

Elements making up the system are:

  • 6000kg decoiler
  • Straightener
  • VEGA clamp feeder
  • DALCOS EXN 1000 servo electric punching machine
  • LXN 1000 fiber optic laser cutting system
  • Fiber optic laser source from 1000W up to 4000W
  • Chiller cooling system
  • ALMACAM programming/nesting software for processing coils of the same width as the product (100% material used)

Features of the system:

  • Laser working area 1000x1000mm
  • Machinable material: from 0.5 to 3mm gauge, up to 1000mm in width
  • Source by IPG Photonics

Available options:

  • 2kW, 3kW and 4kW source
  • Coil car for decoiler
  • Suction system
  • UBIQUITY remote servicing
  • SMARTBATCH unloading table with lateral discharge
  • Robotic unloading system
  • Height-adjustable hydraulic table

The system can also be customized to enable the two machines working independently: EXN as a coil punching machine and LXN as a sheet-fed laser cutter.

Information request »